Equipment & Technology

4 Things To Check Before Calling an Electrician

There’s nothing worse than a power outage, especially if the lights are still on at the neighbor’s place next door. If you seem to be the only one on the block without lights, your house may have an electrical problem.

Contact electrical trouble shooting Bergen County NJ to find the source of your electrical problem. Keep in mind, however, that there might be a minor issue causing that nuisance outage. Before you call an electrician, here are some things to check first.

Check the Light Bulb

The issue may be as simple as having the wrong-sized lightbulb in a fixture, causing the bulb to burn out. Replace the bulb with one requiring a different wattage and then check your lights again to see if that was the problem.

Check the Power Strip

Is your light plugged into a power strip or surge protector? If so, then check it to make sure it wasn’t accidentally turned off. It could also be burned out, so plug your light fixture directly into the wall socket to see if it works that way.

Check the Circuit Breaker

Your circuit breaker might have tripped, causing the lights to go out. Check your circuit breaker panel and flip the breakers all the way to the left and then switch them to the right again. Also, check the fuses to see if any are burned out.

Check the GFCI

A ground-fault circuit interrupter, also known as a GFCI, is typically installed in areas that are close to sources of water, such as a kitchen or bathroom sink. A GFCI can be easily tripped, so check if it’s working by pressing the red button.

The next time your power goes off, check these four things before calling an electrician to turn your lights back on and to save you both time and money.

3 Types of Industrial Mixers

Mixing is a necessary step in many industrial processes, but the type of mixing required depends on the materials you’re working with and the desired end product. Here are three types of industrial mixers.

1. Ribbon Mixers

ribbon mixer has a wide range of usability, meaning it can be used to mix many kinds of different materials. from solids to particulates and liquids. They’re most commonly applied in the mixing of dry solids, such as pharmaceutical and nutritional powders, fertilizers and potting soils and plastic resin, but they can also be used to mix materials such as paint and various chemicals.

2. Vibrational Mixers

When you use a vibrational mixer, you’re likely employing it to create fine-grain powders. These mixers are most useful for this purpose due to how they facilitate the mixing process. They employ the use of energy waves, usually sound waves or ultrasonic waves, to create vibrations that break up and blend your ingredients. You may also use vibrational blenders to mix liquids, pastes and combinations of these with powders.

3. Paddle Mixers

Paddle mixers are generally good for mixing large solids and blending liquids, though they’re also used to break up dry chunks of material into smaller pieces and powders. People employ paddle mixers when they want to ensure that a physical mixing process is as gentle as possible. Paddle mixers are ideal for gentle mixing because their mixing blades are paddle-shaped. They’re round and relatively thick with blunt, rounded edges. If you’re working with food material, paddle blenders are useful because they’re less likely to bruise any of the ingredients. They can also be paired with heating and cooling attachments to adjust the temperature of whatever they’re mixing.

The type of mixing you need to do will inform what blender you use. Some blenders are more useful for mixing solids. Others may be better suited for mixing liquids and gases.

4 Benefits of Solar Energy

Solar energy usage has increased significantly after the last couple of decades. Part of the reason for this is decreasing costs that make it more practical for everyone. Another reason is that more people are discovering the benefits of solar power. 

1. Widespread Applicability

If you live in a sunny environment, it is easier to see the benefits of calling a photovoltaic electrician Bishop CA to install solar panels on your house. Many people believe that homes in areas that do not receive as much direct sunlight, either because they are located farther north or because the climate tends to be cloudy cannot benefit from solar power. This is not true. Photovoltaic panels are able to collect energy from the sun regardless of the weather. Even if the sunlight is indirect, it is likely that solar panels can collect more energy than you need. 

2. Environmental Benefits

In addition to reducing water consumption and greenhouse gas emissions, solar power also prevents dangerous pollutants from getting into the environment. These include particulate matter, nitrogen oxides, and sulfur oxides. 

3. Cost Savings

When used as a supplement to the traditional power grid, solar energy can significantly reduce your utility bills. Potentially, it could eliminate your electrical bill altogether. Some people are even able to make a profit off their solar power by selling excess energy back to the power company. 

4. Increased Home Value

Solar panels are a home upgrade. Many prospective home buyers are concerned about the environment and interested in solar power. They are attracted to homes that already have panels installed so they do not need to absorb the cost themselves. As a result, they may be willing to pay more for a home with solar panels, thus yielding an excellent return on your initial investment. 

It is unclear whether greater awareness of the benefits of solar panels has increased their popularity, thus decreasing the price, or the decreased price led more people to discover their benefits, thus increasing their popularity. In either case, the popularity and affordability of solar panels continue to trend upwards. 

3 Ways to Replicate Plastic Components

Making your own plastic molds can be a useful and cost-effective way to create replicas of useful parts and components. There are several ways to cast your own molds, and this article will detail a few of them. If you are interested in making reusable molds, continue reading to learn how.

1. Cover the Part in Molding Material

The most straightforward way to create a mold is to throw the original part in a container and cover it in the molding material. First, you will need the master part. Make sure it’s free of any grease or dirt, then cover it with a release agent and some bubble dispersing material. Next, take your molding material and microwave it according to the instructions. Start with short bursts of heating until you are more comfortable with the material. Next, pour the mixture over the master part and allow it to harden. You should be able to remove the molding and quickly pop the master part out.

2. Use Silicone to Form a Mold

Using silicone is a slightly more involved process. You will need to combine water, dish soap and silicone in a bowl. Next, you must knead the silicone in the bowl to form a ball. Once the silicone is hard enough, you can press the master part into it to create a mold.

3. Hire Professionals

If you have more complicated parts you need for your business, it’s best to hire plastic molding services. These professionals will ensure your vital components are made without flaws or weak points. In industrial applications that involve a lot of stress and pressure on materials, you should always hire professionals to create your components. Trying to make your own molds without experience is dangerous in certain industrial situations.

Forming molds is a valuable technique for replicating small objects. However, in professional applications where liability is involved, you should always hire a professional to produce the components you need for your business.

The ABCs of Commercial Fire Safety

Fires are too often the cause of expensive insurance claims and business loss. A bit of attention to fire safety can reduce the chance of a fire affecting your company, if not eliminating the possibility altogether. Here are some easy ways to avoid a fire, and it is as simple as ABC.

A: Attend to Equipment

It should be a given that you have fire extinguishers, sprinklers, and smoke alarms in place, but are they functioning properly? Follow manufacturer directions on regular inspection. Replace any faulty equipment immediately. A professional can be hired to handle such tasks, solidifying your confidence that everything is up to par. Calling on a fire protection company San Diego CA may be the right choice. Make sure that regular work tools are cared for properly so that no unnecessary fire risk is created.

B: Be Prepared

There is no substitute for preparation. Fire safety is the responsibility of everyone in the work setting, and company leaders must take the lead in scheduling safety trainings. Make sure all are aware of designated escape routes and exits. Such evacuation plans should be posted where even visitors will clearly notice them. Fire exits should be lighted so that they will not be missed. Floor lights in passages that are likely to be used when escapees have to crawl to safety may literally become a lifesaver.

C: Conduct Drills

It might feel elementary, but regular fire drills have proven to minimize the level of panic during a real emergency. Plan routine drills, but also toss in some that are unannounced so you can accurately assess how ready the staff really is in the case of an emergency.

You can keep employees as well as customers and vendors safer with the practices mentioned here. Minimize loss and pain by always being alert to fire safety.

3 Simple Ways To Maintain Your Company’s Printers

If you work in a business that relies heavily on printers — perhaps even a printing company — you know that it is essential that you maintain your equipment. Here are some simple things to do now to ensure that your printers are always in tip-top shape.

Clean Them Regularly

Printing presses can get dirty if they are subjected to constant use, so it is important to clean them more than you think you should. Use anilox cleaners to remove dried ink from your press for starters. Ensure that you are not just cleaning the inside, but also the outside, because dust that settles on the outside of the printer can easily get inside and cause inaccurate print jobs. Educate everyone who touches the printer on the important of keeping it clean so there are no mishaps.

Use the Right Tools

Know the differences between toner and ink and be sure you are using the correct product in your press. Using the incorrect product can damage your press and cost you unnecessary time and money in repairs. If your printer is compatible with a certain brand, don’t look for a lesser alternative to save money — the risks just aren’t worth it.

Update the Software

Typically, your printers contain some type of software that keeps them running. Software updates can be annoying and seemingly always want to run when it is least convenient, but it is important to stay up to date and allow them to run when needed. Updates not only provide new features, but they can also contain bug fixes or security patches that are needed to keep your printer running safely and efficiently.

Maintaining your printers is an essential — but very simple — task. Follow these tips and your company’s most important pieces of equipment will run well for a long time.

What Is Industrial Filtration Used For?

Most people know what the point of filtration is. Filtration removes particles from liquids and gases. When it comes to industrial processes, filtration is an important element. If you do not have the appropriate filtration equipment, it can cause problems. Here are the most common reasons companies need to use industrial filtration within their business.


One of the most important roles that any filtration system performs is purification. Purification keeps many different products clean and free of any contamination. For example, medicine, water and other chemicals need to be filtered to remove any contaminants. Water, for example, tends to have sediment, carbon, sand and gravel before filtration. A filter can also provide safety because it does not allow cross-contamination or other health hazards that may occur due to a lack of filtration.

Protect Equipment

Protecting your assets and equipment should be a part of every major business decision as a business owner. In industrial manufacturing, you use filtration to protect the machinery that you use. Essentially, if you do not filter out the different particles, they can damage the equipment and lead to system failures. For example, some particles may begin to erode the metal and lead to an expensive replacement.


A part of running any business is to obtain efficiency. Your filtration system can make your company run more efficiently. Once you know the type of filtration system you need and the type of filters, you can begin to work more efficiently. There are various filters and equipment you may need. For example, some companies rely on deep bed filters North America manufacturers provide.

When it comes to industrial filtration, there are a variety of applications that could benefit your company. As long as you have the correct filtration system, you can begin to reap the benefits. Expect better equipment protection, purification and efficiency.

4 Types of Planes

Airplanes are essential for commerce and carrying people over a long distance in a relatively short amount of time. Aircraft come in many varieties and sizes to accommodate varying numbers of passengers and the length needed to travel. Here are four of these varieties of aircraft. 

1. Single Engine

Single-engine aircraft Danbury CT have anywhere from two to six seats and are commonly used in flight training schools due to their less complicated flight control systems and the fact that they are less expensive than multi-engine planes. Most single-engine planes can fly at least 500 nautical miles at a time, with some going up to 1500 nautical miles. Types of single-engine planes are the Beechcraft G36 Bonanza, Cessna 172, and Piper M350. 

2. Turboprop

Turboprop aircraft are powered by two gas turbine engines that burn less fuel than a jet engine, making these planes more fuel-efficient and less expensive to operate. Turboprops can fly just as high as a standard jet plane, but fly slightly slower with a maximum recommended speed of 450 miles per hour. 

3. Cargo

Cargo planes are large planes that carry freight instead of passengers. The doors of these aircraft are wider than those of passenger planes to accommodate large shipments of goods entering and exiting the aircraft. The only people that travel on cargo jets are those required for its necessary operation, such as pilots, co-pilots, and flight engineers. Types of cargo planes include the Boeing 737 and Airbus 340.

4. Jumbo

Jumbo jets are wide-body aircraft that carry a large number of people over a long distance. Most jumbo jets can travel 9,500 miles before needing to stop and refuel. Some types of jumbo aircraft include the Airbus A380, Boeing 777, and Boeing 747.

Try to identify one of these aircraft types the next time you spot a plane in the sky. 

3 Ways to Save Big Bucks on Energy

The costs of heating and cooling your home can add up without you even realizing it. A few more dollars on your bills each month can make a big long-term impact. Is your house’s furnace or air conditioner unit old? It may be losing efficiency, and hvac contractors Hollywood FL can help you look for a new unit that works more effectively and helps you save. Try these other tips to keep more money in your pocket, too.

1. Put Up Some Curtains

Window coverings can help keep you cool in the summer and warm in the winter. Not only do they keep the sunshine out on hot days, but they also help keep your heat inside. Plus, they are easily changed if you want to redecorate. Try the light-blocking variety in the bedroom so you can sleep in on Saturday mornings without being disturbed by the sun’s rays. Not only are curtains functional but they can be a nice indulgence, too!

2. Use Light Timers

Put these handy devices on your lamps and other fixtures to avoid leaving them on at night or when no one is normally in a room. You can program them to turn on and off at certain times. Pick a few up at your local hardware store and stop wasting energy today!

3. Program Your Thermostat

How often is your furnace working overtime while you are at your job or school? Get a thermostat that you can set to automatically change the temperature at certain times of the day. Some newer models can even be programmed from your smartphone, making cutting costs effortless!

A few changes around the house can really add up. Just think of what else you could be spending your money on. Before you know it, you could be putting those savings towards a new vacation or another treat for yourself. The sooner you start, the quicker that will happen!

The Advantages Of 5G Technology

Technology evolves every day and the latest development on the market is the 5G network. This system provides a wireless connection to places that relied on hard-wired internet before. It also gets the information that you request to you faster than in the past and gives you clearer access to streaming programs and other forms of entertainment. Here are the advantages to this type of service.

Receive What You Need Quicker

When you use 5G technology, you will get your documents, images, and files quicker than you would with other networks. Using radial combiners to boost the waves from multiple receivers, you can receive the data you need when you require it. This is advantageous if you are in a hurry or must complete a project with a short due date. Its partnership with cloud computing also allows programs to operate faster on their own with little use of additional processors. This frees up the memory on your computer or cell phone so it can be used by other operations. It will also prolong the life of your electronics since it will lessen the strain on it as it performs its duties. 

Add All Your Electronics To the Network

With the former technology, you could only have one or two devices on the WiFi at a time before you utilized all the bandwidth that it would allow. When you access 5G technology, you can put as many electronics as you want on your system and they will operate at fast speeds. This can include your computers, cell phones, smart televisions, gaming programs, and any artificial intelligence products that you may own. Each will download information quickly and efficiently at the same rate as every other item in the house. Eventually, it will lead to city facilities to operate on their own and to cars driving themselves with little help from the driver.